• Please make sure that your motherboard has a compatible 12V RGB 4-pin header.

• Once that is confirmed, you can either plug the fans into an RGB hub (if your fans set came with one) or daisy chain the fans together.

• Use the RGB Sync adapter cable, and plug the corresponding 4-pin connector into the RGB header on your motherboard and the other end to the hub (or last fan of the daisy chain).

• Please note that you should have the arrow (12v) on the connector pointed to the 12v pin (1st pin).

• From here, you would use the RGB software made by your motherboard manufacturer.

文章

文章具体内容